Shenzhen Qunmao Display Technology Co., Ltd.Shenzhen Qunmao Display Technology Co., Ltd.Shenzhen Qunmao Display Technology Co., Ltd.Shenzhen Qunmao Display Technology Co., Ltd.Shenzhen Qunmao Display Technology Co., Ltd.Shenzhen Qunmao Display Technology Co., Ltd.
Shenzhen Qunmao Display Technology Co., Ltd.
Home  >  News  >   Product Knowledge

Commercial Video Wall Splicing Gap: 0.88mm vs 1.7mm vs 3.5mm

When a project specifies a commercial video wall, the splicing gap is one of the first decisions that affects both the visual result and the budget. A 0.88mm panel and a 3.5mm panel can look similar in a product photo, but on a finished 2x2 or 3x3 wall the difference in visible seams is what the end client notices first. This guide explains what the gap actually means, how it changes with configuration, and what B2B buyers should confirm before ordering.


What the Splicing Gap Actually Means on a Finished Wall

The splicing gap is the visible distance between the active areas of two adjacent panels. On a single screen it is a number on a spec sheet. On a commercial video wall, it becomes a grid of lines across the whole image — and the more panels in the configuration, the more lines the viewer sees.

That is why the gap decision cannot be made from the panel spec alone. It has to be made together with the configuration (2x2, 3x3, 4x4) and the viewing distance the project expects.


0.88mm vs 1.7mm vs 3.5mm: Who Each Gap Suits

Panel suppliers offer several gap options, and the 46-inch narrow bezel model lists 3.5mm, 0.88mm, 1.8mm, 1.7mm, and 0mm as available options. The practical difference is how visible the seams are at the project’s viewing distance:

0.88mm and 0mm

The narrowest options. These suit projects where the wall is viewed up close, or where the client explicitly requires a near-seamless image — premium retail, brand showrooms, high-end control rooms. They carry the highest panel cost and should be specified only when the viewing distance justifies it.

1.7mm and 1.8mm

The middle tier. A 1.7mm gap is narrow enough that seams are much less noticeable than a standard 3.5mm panel, but it does not carry the premium of the 0.88mm option. The 1.7mm LCD splicing display listed on the product page uses a CSOT OC with 1920×1080 resolution, 500cd/m² brightness, 4500:1 contrast, and a 178-degree viewing angle — a specification set aimed at indoor advertising, control rooms, and commercial display walls.

3.5mm

The standard option. Suitable for projects where the wall is viewed from a distance, or where budget is the primary constraint and the seams are acceptable in the content design.

Rule of thumb for B2B buyers: match the gap to the viewing distance, not to the brochure. A 0.88mm wall viewed from far away looks almost the same as a 1.7mm wall — the extra cost buys less than the client expects. A 3.5mm wall viewed up close shows every seam.


2x2 vs 3x3: How Configuration Changes the Seam Count

The same gap width produces a different visual result depending on the configuration. A 2x2 wall has one horizontal and one vertical seam line. A 3x3 wall has two of each. A 4x4 wall has three of each. The more panels, the more the gap dominates the image — which is why narrower gaps matter more in larger configurations.

For a project that is deciding between 2x2 and 3x3, the gap decision should be made after the configuration is fixed, not before. A gap that looks acceptable in 2x2 may be too visible in 3x3 at the same viewing distance.


How Installation Affects What the Viewer Sees

The 46-inch video wall panel supports cabinet type, wall hanging, and ceiling installation. Installation flatness matters because a misaligned panel makes the gap look wider than the spec — the eye reads the step between panels, not the nominal gap. For wall-hanging installations in particular, confirm the mounting structure and alignment tolerance with the supplier before the wall is built.

Do not finalize the wall structure before the gap and configuration are fixed. The mounting frame, the number of panels, and the gap all affect the final wall dimensions. Changing the gap after the frame is built means reworking the installation.


What B2B Buyers Should Confirm Before Ordering

  • Gap and configuration together. Confirm the gap option against the final 2x2, 3x3, or 4x4 layout, not as a standalone spec.

  • Viewing distance. Confirm the distance the end client will actually view the wall from, and whether the chosen gap is justified at that distance.

  • Panel specification. For the 1.7mm option, the listed specification is 1920×1080, 500cd/m², 4500:1, 178°, about 60,000 hours service life; confirm the current specification for the exact panel being ordered.

  • Installation method. Cabinet, wall hanging, or ceiling — confirm which one the project will use and whether the mounting frame is included.

  • Certifications. CE, FCC, RoHS, and CCC are listed for this model; request current certificates for the ordered configuration.

  • OEM and packaging. Panel color is listed as black or custom color, and OEM and ODM services are available; confirm branding, packaging, and carton marking requirements at quotation stage.

  • Supply and lead time. The product page lists 3,000–5,000 units in stock per month and a fast delivery time of 1–7 days for standard configurations; confirm lead time for the specific gap and configuration being ordered.


Quick Pre-Order Checklist

  • Configuration fixed: 2x2, 3x3, 4x4, or larger

  • Gap option selected against the configuration and viewing distance

  • Panel specification confirmed for the exact option ordered

  • Installation method chosen: cabinet, wall hanging, or ceiling

  • Mounting frame and alignment tolerance confirmed

  • Panel color and OEM branding requirements defined

  • Current certificates requested for the ordered configuration

  • Supply volume and lead time confirmed in writing


Specifying a commercial video wall for a project?

Send your wall size, planned configuration (2x2 / 3x3), viewing distance, and gap preference — we will confirm the panel specification, installation method, OEM requirements, and wholesale pricing.

Send your project requirements →

Related news
Copyright © 2015-2026 Qunmao Display Technology Co., Ltd. All Rights Reserved.
  • Shenzhen Qunmao Display Technology Co., Ltd.
  • Shenzhen Qunmao Display Technology Co., Ltd.
  • Shenzhen Qunmao Display Technology Co., Ltd.
  • Shenzhen Qunmao Display Technology Co., Ltd.
  • Shenzhen Qunmao Display Technology Co., Ltd.
Shenzhen Qunmao Display Technology Co., Ltd.
Shenzhen Qunmao Display Technology Co., Ltd.
Shenzhen Qunmao Display Technology Co., Ltd.
Shenzhen Qunmao Display Technology Co., Ltd.
Shenzhen Qunmao Display Technology Co., Ltd.